Description

Dakota Digital Series III instrument systems offer the latest technologies and features for your custom vehicles. High brightness vacuum fluorescent displays provide a lifetime of trouble free use while offering increased accuracy and features!

Full 6 Gauge Instrusment System fits into OEM bezel and uses OEM mounting hardware fo 1978- 88 Oldsmobile Cutlass.

Fits directly into existing bezel (not included).

Digital Gauges
Speedometer
·0 -255 MPH (optional metric version 0- 255 km/h)
Tachometer
·0- 17,500 RPM
Oil Pressure
·0- 99 psi
Water Temperature
·0- 300ºF (optional metric version 0- 150ºC)
Fuel Level
·0- 99%
Voltmeter
·8- 17 VDC
Standard Colors
·Blue or Teal
Digital Message Centers

Standard Displays
·Odometer (One time user settable, Million Mile)
·Dual (A/B) Trip Meter (0- 9,999.9)
Performance Meters
·0- 60 MPH Timer (0- 100 kmh)
·1/4 mile time
·1/4 mile end speed (trap speed)
·High speed recall
·High RPM recall
Gauges
·Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer.
Built-in Indicators
Indicators
·Turn Signals (Left/ Right)
·High Beam
·Check Engine
·Parking Brake
·Cruise Control (On/ On & Engaged when vehicle is equipped)
·Gear Position (Optional GSS-2000 sensor required)
·4 x 4 (When vehicle is equipped)
·Wait to Start (When vehicle is equipped)
**Not all OEM indicator lamp functions will be replaced.
If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.

Water Temperature
1/8″ NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure
1/8″ NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator
Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5″ clearance extending between the cable drive output and any obstruction. Part # 130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required. (Tremec and Ford style adaptors available on request.)
Bushings
Each kit comes with 1/8″ to 1/4″, 3/8″ and 1/2″ NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.
Calibration
Pushbutton
Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.

**It will take two weeks to manufacture**